The Kanger DRIPBOX 160W TC Kit
is an all inclusive kit for squonk vaping right out of the box. The Kanger DRIPBOX 160W TC Mod is a squonk mod that allows you to house a 7mL squueze bottle, filled with you favorite liquid, inside of the mod. Once the bottle is squeezed liquid is fed up through the bottom of the Subdrip attachment and wicks directly into your coil, completely removing the constant hassle of dripping that comes with RDA's but without sacrificing the capability of a DIY attachment. This mod is capable of supporting nickel, titanium, stainless steel and ni-chrome wire for temperature control mode. For Ni200, Ti, and SS the DRIPBOX will accomodate attachments 0.05?? or higher and for Ni-chrome this mod can fire coils with a resistance of 0.1?? or higher.
The SUBDRIP attachment is a unique RDA that can use either custom built coils or Kanger's pre-built coil heads. This tank comes equipped with a large velocity style build deck that makes custom coil building a breeze and a top fill option or bottom feeding squonk method is available to make refilling easier than ever before. This tank also features a 22mm width, a strong stainless steel housing and it comes equipped with a 0.2 ohm Kanger pre-built coil to right out of the box.
1 x Kanger Dripbox 160W Device
1 x Kanger Subdrip 160 RBA
1 x 0.25 Ohm Stainless Steel Drip Coil (Pre-Installed)
1 x 0.2 Ohm Kanthal Drip Coil
1 x Spare Squonk Bottle
1 x Pack of Accessories
1 x Pad of Cotton
1 x Micro USB Charging CableSold Separately:
Please note the Kanger DRIPBOX 160W TC Starter Kit requires two high amp 18650 batteries that do not come included in the kit. Kanger also recommends you use an external charger to maintain optimal charging times. If you need to purchase these items you can do so by selecting the Add 2 x 18650 Batteries and Add Dual Charger options above. If you have any questions about these products please contact our customer service line during normal business hours for assistance.
More from this brand: KangerTech